KOCAELİ - Fatih Tekcan / Emrullah Ozturk - Kocaeli University (KOU), boron nitride and a mixture made of plastic with a very high value added products for the electronic processor “nanocomposite based thermal interface material” was developed.

KOU Department of Chemical Engineering Asst. Assoc. Güralp Özkoç AA correspondent, said competition in the electronics industry with evolving technology and increased customer satisfaction and the importance of aesthetic concerns, he said.

İn recent years, electronic devices shrink, but increased energy consumption in the device saves the Özkoç, downsizing trend in electronics devices overheating problem in itself because it feels it has become thoroughly noted. Electronic systems to function properly, resulting in the removal of heat from the system should be Özkoç striking, said: Day by day "For this purpose, the manufacturer put forward a new cooling solutions. The most commonly used method of cooling fins (heat-sink) and the cooling method. İn this method, the cooled air passing through the system in contact with the fins in the thin conductive cooling of the electronic system is provided indirectly. But the biggest problem encountered in such systems, the system is cooled with cooling fins break the surface is completely smooth because of the lack of air spaces in between to form a resistance against the transmission of heat and cooling efficiency düşürmesidir." Özkoç, they are preparing a project on this subject, and the National Boron Research Institute in 2008 and 230 thousand pounds in the budget provided in the study reported.

Dr. Kemaloğlu Şebnem Doğan, Ayse Aytaç and their work in June resulted in the Advanced Engineering Güralp Özkoç voicing, "This study is the first in Turkey in the field. One of the first studies in the world, we can say. Boron nitride very high economic value of current can be used in life we have become a product. Fully developed a product for domestic products, the latest technology. Existing market share as soon as the product would take a $ 10 million estimate “he said. Obtained from a mixture of boron nitride and plastic products, mainly computer-processor for all electronic goods can be used "voicing" Özkoç, gave the following information: "Product, melt to know the shape, a compressible plastic material. Nano-sized boron nitride scrambled from plastic. Normally a plastic thing very difficult to mix. So first of these two substances brought into line with each other. Boron nitrites have made a number of chemical processes. Brought into line with plastic. Scrambled from behind the plastic. The product of thermal conductivity, heat conductivity and can be compressed at least as good as thermal pastes that were very important to us. So we did it. We develop products according to the market in terms of thermal conductivity better than existing products. Cost of products that can compete in terms of level of the market. Terms of use are very large. Short time period of time may be preferred in the sector will be a product."

OVERHEAT PROBLEM LAST
Güralp Özkoç, electronic product, in articles in question is located between the processor and cooling unit, so that the problem of overheating in front of computer switching stressed.

The product, currently used in electronic goods products for the same purpose, putting in a much better performing Özkoç,"currently the most common product in the sector of thermal pastes. However, according to this very unpractical thermal paste. Performance also lower. Thermal paste in the processor and other components of adheres useless,” he said.