| Problem |
Cause |
Solution |
| Coating peels. |
Coating is too thick. |
Dilute coating mixture so that the layer thickness does not exceed 100µm. |
| Coating does not adhere on the surface. |
Bad surface conditions. |
Clean and degrease surface, heat surface prior to application to 100-150°C. |
| Further layers do not stick on the first layer. |
First coating is not completely dried. |
Extend drying time, remove loose particles and coat again. |
| Coating cracking. |
Coating mixture is too thick. |
Dilute coating mixture in such way that thinner layers can be applied. |
| Cloudy, uneven application when spraying. |
Coating mixture is not stirred up, spray gun is led jerkily not uniform. |
Stir coating mixture or use a mixer. Pull even courses with spray gun. |
